Compression garments come in different compression classes, ranges, or levels. This description differs between regions or countries. In Germany, for example, the so-called RAL-GZG standard is dividing compression garments into four different compression classes from mild to very strong compression or class I-IV. The exact pressure of each compression garment is usually specified in millimetres of mercury (mmHg) and varies according to medical necessity.  

It is not always useful to assign a specific compression class to a certain condition, therefore Healthcare Professionals will make individual decisions on the suitability of a certain compression level for each patient. This is usually based on the clinical condition itself, the patient’s tolerability for compression, additional conditions, and further individual needs.  

How to use JOBST Elvarex  range for the upper extremities: 

1. Turn the arm sleeve inside out and fold the front part of the compression arm sleeve inward. 


2. Use the other hand to pull the inside-out arm sleeve as far over the other arm as possible. 


3. Then, fold the upper end outward and pull the compression arm sleeve gradually over the elbow and up to the axilla. 

Tip: Hold on to some support (e.g. a door handle) with the arm to be dressed. The compression arm sleeve fits correctly when it covers the arm evenly without forming creases. 

For the JOBST Elvarex Glove: 

1. Slip fingers into the glove starting at the wrist. 


2. Position the glove so that it is comfortable around the palm and thumb. 


3. To assure a precise fit, work the glove into the web spaces of your hand. 

How to use JOBST Elvarex for the lower extremities: 

1. Turn the compression inside out all the way to the heel. 


2. Pull apart the folded –in foot part using both hands and pull over the foot all the way to the heel. 


3. Gradually pull the compression stocking over the instep and heel.  


4. Gradually pull the compression stocking upward by returning the stocking to a right-side out position piece by piece. 


5. Distribute the stocking evenly by massaging with both hands until the stocking fits and does not form creases. It is particularly helpful to wear rubber gloves for this step. 


6. For a Waist High garment continue working the garment up to the middle of your thigh. Stand up. With both hands, grab a handful of fabric and pull it up to your waist. Adjust your support so that it is snug at your midsection. This will keep it from sliding down. Pull the midsection to its proper height. 


7. Slip your hands, palm out, into the back and lift the fabric up and away from your skin. Let it fall back to fit snugly over the buttocks. 

For more information on how to use JOBST Elvarex compression garments, please watch our donning videos: 

Tips for easy application of JOBST Elvarex and Elvarex Soft Knee High (AD)  

Tips for easy removal of JOBST Elvarex and Elvarex Soft Knee High (AD)   

We recommend to wash the JOBST compression garment on a daily basis, or at least every other day. 

For this purpose, you may use a mild detergent and a low spin cycle setting. Do not use laundry additives such as fabric softener, optical brightener or stain remover.  

Rinse your compression garment well. 

Roll up the wet compression garment in a towel after washing and press out excess moisture. Do not wring. 

Do not dry the compression garment on a radiator or in direct sunlight. 

Machine washable in warm water.  

Do not bleach. 

Flat drying or tumble dry – low heat. For tumble dryer compatibility please check your compression garment’s product label; the label should not be removed. 

Do not dry clean. 

Do not iron. 

Note: a laundry net provides additional protection for the knitted fabric  

Silicone band care: If the product has a silicone band, hand wash it to remove excess creams, lotions, hair and other foreign material.