Compression garments come in different compression classes, ranges, or levels. This description differs between regions or countries. In Germany, for example, the so-called RAL-GZG standard is dividing compression garments into four different compression classes from mild to very strong compression or class I-IV. The exact pressure of each compression garment is usually specified in millimeters of mercury (mmHg) and varies according to medical necessity. 

 

It is not always useful to assign a specific compression class to a certain condition, therefore Healthcare Professionals will make individual decisions on the suitability of a certain compression level for each patient. This is usually based on the clinical condition itself, the patient’s tolerability for compression, additional conditions, and further individual needs. 

To use JOBST® Bella LITE compression gloves:

1. 
   

   Slip fingers into glove.



2. 
   

   Position the glove so that it sits comfortably around the palm and thumb.



3. 
   

   The glove should be positioned so that the fingers end near the beds of the fingernails.



4. 
   

   If the finger lengths are too long, mark the finger at the appropriate length, remove the glove, then trim the length of the glove finger directly above the marked area and remove the loose thread to lock down the seam. Be careful not to remove too much of the finger length.

Other recommendations: Open wounds should be covered before applying gloves. Remove jewelry before applying. The glove can be used on either hand:

A. Right hand: the label is visible on the wrist.

B. Left hand: turn the glove “inside out”, inverting the fingers. The label is on the inside.